Special side pipe exhaust for your Puch Maxi S moped / moped.
The black-painted tuning exhaust is supplied ready to fit with the required screw-on bracket.
The mounting flange is attached to a slotted hole and can therefore be ideally positioned.
Note: For mounting on your Maxi N, you must either use an additional clamp or bridge the distance with an extension brace.
Depending on the batch, the paintwork is not highly resistant to vibrations or environmental influences. It is recommended to consolidate the paintwork using heat protection paint.
Details
| Manufacturer | Made in Portugal |
| Material | Steel |
| Surface | varnished |
| Color | black |
| Mounting type | Nuts & bolts |
| Ø Internal connection | 24.5 mm |
| Number of fixing points | 3 pcs |
| Ø outside | 60 mm |
| Ø Flame tube outside | 28 mm |
| Exhaust type | Sidepipe |
| Total length | 860 mm |
| Flame tube attachment | Stud bolts & nuts |
Suitable for the following models
| Puch | E50 |
Accessories & related products
Exhaust 18 mm replica (with number) | Puch Maxi S, N
Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Total length: 920 mm · Color: Chrome · Ø Silencer: 59 mm · Ø Internal connection: 14 mm · Ø Flame tube outside: 18 mm · Exhaust type: Flute · Mounting type: Welded lug · Number of fixing points: 4 pcs · Flame tube attachment: Flange
EUR 67.50
Hot 
Exhaust 22 mm 2-piece replica (with number) | Puch
Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Color: Chrome · Mounting type: Stud bolts & nuts · Mounting type: Welded lug · Number of fixing points: 4 pcs · Ø outside: 58 mm · Ø Flame tube outside: 22 mm · Exhaust type: Flute · Total length: 920 mm · Flame tube attachment: Flange
EUR 75.60
66HEROES Exhaust bracket 50 mm flat Inox
Manufacturer: 66HEROES · Material: Chrome steel (known as Nirosta®) · Surface: electropolished · Total length: 81 mm · Thickness: 4 mm · Hole spacing: 50 mm · Number of fixing points: 2 pcs · Ø mounting hole: 8.3 mm · Ø mounting hole: 20 mm
EUR 13.90
Not in stock
swiing® ingenious gasket outlet 28 mm graphite
Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Place of use: Exhaust · Thickness: 3 mm · Reinforced: No · Ø inside: 27.4 mm · Ø outlet inside: 28 mm · Hole spacing outlet: 42.5 mm · Ø screw holder: 6.6 mm · Area of application: Tuning
EUR 8.65
Sidepipe exhaust set (Ø 28 / 60 mm) Chrome | Puch
Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Ø outside: 60 mm · Total length: 600 mm · Color: Chrome · Ø Internal connection: 28 mm · Ø Flame tube outside: 28 mm · Exhaust type: Sidepipe · Mounting type: Screwed clamp · Flame tube attachment: Flange
EUR 180.30
swiing® ingenious resonance exhaust set Ø 28 / 70 mm | Puch Maxi, X30 Sport
Total length: 730 mm · Manufacturer: swiing · Material: Steel · Surface: chrome-plated · Ø outside: 70 mm · Color: Chrome · Mounting type: Screwed clamp · Ø Internal connection: 28 mm · Exhaust type: Cigar · Flame tube attachment: Flange
EUR 141.90
Exhaust Boss Demper Ø 28 / 60 mm chrome
Material: Steel · Surface: chrome-plated · Ø outside: 60 mm · Total length: 580 mm · Color: Chrome · Ø Silencer: 60 mm · Ø Internal connection: 28 mm · Exhaust type: Dragpipe / sharp end · Mounting type: Screwed clamp · Flame tube attachment: Plug connection clamped
EUR 116.30
Exhaust sidepipe 28 mm chrome | Puch Maxi S
Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Ø outside: 60 mm · Total length: 860 mm · Color: Chrome · Ø Internal connection: 24.5 mm · Ø Flame tube outside: 28 mm · Exhaust type: Sidepipe · Mounting type: Nuts & bolts · Number of fixing points: 3 pcs · Flame tube attachment: Stud bolts & nuts
EUR 145.40
Moped fans like you also bought:
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Number of components: 1 pcs
EUR 3.25
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Mounting type: Union nut · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Reserve level: 70 mm
EUR 11.50
GPO side bars black matt (1A quality) | Puch Maxi S
Material: Steel · Surface: varnished · Color: black · Total length: 420 mm · Width: 170 mm · Height: 35 mm · Manufacturer: GPO · Ø outside: 12.5 mm · Mounting type: Screws · Number of fixing points: 4 pcs · Hole spacing: 410 mm · Ø mounting hole: 8.1 mm
EUR 34.80
GPO mudguard strut front 17" black
Manufacturer: GPO · Material: Steel · Surface: varnished · Color: black · Wheel size [inch]: 17 " · Total length: 305 mm · Distance mudguard - center hole: 300 mm · Mounting type: Nuts & bolts · Number of fixing points: 4 pcs · Ø mounting hole: 7 mm · Ø mounting hole: 12.5 mm
EUR 17.30
Collection only possible with online purchase and appointment.
