Special graphite exhaust gasket for mopeds and mopeds with a 28 mm exhaust manifold.
This special graphite gasket is reinforced with an aluminum insert and is temperature-resistant up to 3000°C. The material expands with heat and therefore adapts to unevenness of up to 1.5 mm.
The seal can only be fitted once, as it hardens after the expansion process.
Hole spacing: 42 mm
Ø inside: 28 mm
Thickness: 3 mm
Material: graphite
Exceptional product for the highest demands of the quality brand swiing®.
Details
Manufacturer | swiing® ingenious parts |
Place of use | Exhaust |
Material | Graphite / Graphite |
Reinforced | No |
Ø inside | 27.4 mm |
Thickness | 3 mm |
Ø outlet inside | 28 mm |
Area of application | Tuning |
Hole spacing outlet | 42.5 mm |
Ø screw holder | 6.6 mm |
Suitable for the following models
Puch | E50 ZA50 (air-cooled) ZA50 (fan-cooled) Z50 (X30 Sport) Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
Tomos |
Accessories & related products
swiing® ingenious gasket outlet (18 - 22 mm) graphite
Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Place of use: Exhaust · Thickness: 3.4 mm · Reinforced: No · Ø outlet inside: 22.7 mm · Hole spacing outlet: 37.5 - 42.5 mm · Ø screw holder: 7.3 mm · Area of application: Standard
EUR 8.10
Moped fans like you also bought:
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Number of components: 1 pcs
EUR 3.30
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Ø inside: 106 mm · Ø outside: 116 mm · Thickness: 1 mm · Number of components: 1 pcs · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 4.60
swiing® ingenious gasket outlet (18 - 22 mm) graphite
Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Place of use: Exhaust · Thickness: 3.4 mm · Reinforced: No · Ø outlet inside: 22.7 mm · Hole spacing outlet: 37.5 - 42.5 mm · Ø screw holder: 7.3 mm · Area of application: Standard
EUR 8.10