Complete wiring harness with connected MERIT light switch for your moped, moped and small motorcycle.
This wiring harness, equipped with all cable clamps and wire terminals, is a 1 to 1 replica of an original wiring harness.
No adjustments are required during installation.
Revised version of the previously offered light switch. The contact plate of the upper switch-off button has been reinforced.
Note: We recommend checking all stud screws in the switch and on the terminal and tightening them if necessary before installation.
The cable for the horn is not included in the scope of delivery.
Nostalgic product for the highest demands of the quality brand swiing®.
Details
| Cable cross-section [mm²] | 1.5 mm² |
| Ø Receptacle | 22 mm |
| Manufacturer | swiing® revival parts |
| Area of application | Standard |
| Number of cables | 5 pcs |
| Cable bifurcation to motor | 950 mm |
| Switch included | Yes |
| Cable bifurcation to lamp | 230 mm |
| Luster terminal | Yes |
| Cable bifurcation to switch | 400 mm |
| Tail light cable length | 1000 mm |
Suitable for the following models
| Universal | |
| Puch | |
| Sachs | |
| Zündapp Belmondo |
Accessories & related products
Hot 
Leonelli 12V voltage regulator (1A quality)
Width: 27 mm · Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Tension: 12 V · Type of current: Alternating current (AC) · Mounting type: Screws · Performance: 100 W · Height: 15 mm · Total length: 50 mm · Ø mounting hole: 6 mm
EUR 40.60
Hot
Leonelli 6V voltage regulator (1A quality)
Width: 27 mm · Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Tension: 6 V · Type of current: Alternating current (AC) · Mounting type: Screws · Performance: 50 W · Height: 15 mm · Total length: 50 mm · Ø mounting hole: 6 mm
EUR 34.80
swiing® revival wiring harness | Puch / Sachs
Manufacturer: swiing® revival parts · Area of application: Standard · Number of cables: 5 pcs · Cable bifurcation to motor: 870 mm · Switch included: No · Luster terminal: Yes · Cable bifurcation to lamp: 140 mm · Cable bifurcation to switch: 480 mm · Tail light cable length: 1000 mm
EUR 27.80
Moped fans like you also bought:
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Number of components: 1 pcs
EUR 3.25
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Ø outside: 5 mm · Total length: 6 mm · Thread length: 4 mm · Number of components: 2 pcs
EUR 2.30
Hot
Leonelli 6V voltage regulator (1A quality)
Width: 27 mm · Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Tension: 6 V · Type of current: Alternating current (AC) · Mounting type: Screws · Performance: 50 W · Height: 15 mm · Total length: 50 mm · Ø mounting hole: 6 mm
EUR 34.80
Inner cable set automatic | Puch E50
Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Total length: 1600 mm · Total length: 2200 mm
EUR 11.50
Collection only possible with online purchase and appointment.
