Special adjusting screw holder made of aluminum to be able to mount adjusting screws on the old Magura grips on your moped, moped and small motorcycle.
The holder is pushed into the Magura grip with the chamfered side.
Attention: Only applicable to the old Magura grips, where the throttle cable is mounted directly with a cable clamp in the grip tube (not suitable for the new grips with sliding block).
Internal thread: M6x1 mm (standard set screws)
Material: aluminium
Surface: colourless anodized
Figures 4 & 5 show the mount in assembled condition.
Nostalgic product for the highest demands of the quality brand swiing®.
Details
| Manufacturer | swiing® revival parts |
| Material | Aluminum |
| Surface | anodized |
| Color | silver, transparent |
| Thread type | M6x1 (standard thread) |
Suitable for the following models
| Universal | |
| Puch | |
| Sachs | |
| Zündapp Belmondo |
Moped fans like you also bought:
Magura cable clamp Ø 8 x 15 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Thread type: M6x1 (standard thread) · Ø outside: 8 mm · Ø Cable bushing: 2.3 mm · Drive: External hexagon · Drive: Slot · Ø Bundle: 6 mm · Width across flats SW: 7 mm · Total length: 15 mm · Screw head: Hexagon · Thread length: 7 mm · Area of application: Standard
EUR 2.90
Magura adjusting screw brake short
Manufacturer: Magura · Material: Brass · Surface: nickel-plated · Color: silver · Ø shaft: 6.1 mm · Drive: Knurled screw · Total length: 31 mm · Total length: 40 mm · Ø External head: 9.15 mm · Thread type: MF6x0.75 (fine pitch thread) · Shank length: 6.9 mm · Thread length: 15 mm
EUR 3.95
Elring Dirko HT sealing compound gray (silicone) 70 ml permanently elastic up to 315°C
Manufacturer: Elring · Area of application: Chemistry · Material: Silicone · Color: gray · Contents [ml]: 70 ml · Hazard warning: Causes damage to organs through prolonged or repeated exposure · Gap dimension (max.): 2 mm · Temperature resistance (min.): -60 - 315 °C
EUR 23.20
EUR 331.43/l
Magura set screw M6x34 mm lock nut SW10
Thread type: M6x1 (standard thread) · Total length: 34 mm · Slotted: No · Ø Receptacle: 7.05 mm · Manufacturer: Magura · Ø cable holder: 3.05 mm · Width across flats nut: 10 mm · Width across flats Screw: 8 mm · Material: Brass · Surface: nickel-plated · Thread length: 23 mm
EUR 2.90
Crankshaft | Zündapp (Type 434 / 247)
Material: Steel · Cheek type: standard · Crankshaft stroke: 42 mm · Ø coupling pin / vario pin: 15 mm · Thread type: MF10x1 (fine pitch thread) · Connecting rod length center-center: 91.5 mm · Thread length: 8.5 mm · Thread length: 14 mm · Total length of crankpin on clutch side: 40.4 mm · Total length crankpin ignition side: 65 mm · Ø crank webs: 85 mm · Ø piston pin (B): 12 mm · Ø Connecting rod eye: 16 mm · Ø Bearing seat (clutch side): 15 mm · Ø Bearing seat (ignition side): 15 mm · Dimension needle bearing: 12 /15 x 14.2 mm (axe 12) · Wide crank webs: 30 mm · Ø 1st step (on the coupling side): 21 mm · Ø 2nd shoulder (on the clutch side): 9.6 mm · Length of shoulder (ignition side): 35 mm · Weight: 892 g
EUR 186.20
Collection only possible with online purchase and appointment.
