Choke lever for attachment to the left brake lever on your moped, moped or small motorcycle.
The decompression lever with slotted mount is attached to older grip units (e.g. Magura) with a clamping screw and nut.
Figure 3 & 4 shows the mounted decompression lever and is for illustrative purposes only.
You can find the clamping nipple for attaching the cable that matches the decompression lever, throttle grips and other starter lever versions in the accessories section.
Nostalgic product for the highest demands from the quality brand swiing®.
Details
| Manufacturer | swiing® revival parts |
| Place of use | left |
| Color | white |
Suitable for the following models
| Universal | |
| Puch | |
| Sachs | |
| Zündapp Belmondo |
Accessories & related products
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Ø Cable bushing: 1.6 mm · Drive: Slot · Ø outside: 5 mm · Screw head: Lens head · Total length: 6 mm · Thread length: 4 mm · Number of components: 2 pcs
EUR 2.35
Magura deco / clutch lever black
Manufacturer: Magura · Material: Plastic · Material: Steel · Housing material: Steel · Material lever: Plastic · Surface: burnished · Ø inside: 22 mm · Total length: 94 mm · Thread type: M5x0.8 (standard thread) · Mounting type: Screws · Number of fixing points: 2 pcs · Color: black
EUR 58.60
Decompressor cable Ø 1.5 mm x 180 cm (pear-shaped nipple)
Ø Stranded wire: 1.5 mm · Cable length: 1800 mm · Nipple shape: Pears · Ø nipple: 3.3 mm · Ø nipple: 5 mm · Nipple length: 7 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Pony OEM number: P0919
EUR 2.80
swiing® revival decorative lever slotted mount left black (Magura)
Manufacturer: swiing® revival parts · Material: Plastic · Material: Sheet metal (steel) · Surface: galvanized (blue) · Surface: raw · Color: black · Place of use: left · Total length: 50 mm · Thickness: 1.2 mm · Height: 19.6 mm
EUR 29.30
Moped fans like you also bought:
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Ø Cable bushing: 1.6 mm · Drive: Slot · Ø outside: 5 mm · Screw head: Lens head · Total length: 6 mm · Thread length: 4 mm · Number of components: 2 pcs
EUR 2.35
Speedometer 60 km/h Ø 48 mm black / chrome
Ø Receptacle: 48 mm · Manufacturer: Made in Germany · Material: Metal · Material: Plastic · Color: Chrome · Color: black · Surface: chrome-plated · Color: red · Color: white · Thread type: MF10x1 (fine pitch thread) · Maximum speed: 60 Km/h · Lighting: Light slit · Ø outside: 50.4 mm · Depth: 50 mm · 4-edge speedometer cable: 2 mm · Total height: 70 mm
EUR 70.40
Hot 
Leonelli 12V voltage regulator (1A quality)
Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Tension: 12 V · Type of current: Alternating current (AC) · Total length: 50 mm · Performance: 100 W · Width: 27 mm · Height: 15 mm · Mounting type: Screws · Ø mounting hole: 6 mm
EUR 41.00
swiing® revival engine seal | Sachs 502, 50/2, 50/3, 50/4 (A1828)
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Ø inside: 86 mm · Total length: 250 mm · Width: 170 mm · Thickness: 0.4 mm · Number of components: 1 pcs · Number of fixing points: 16 pcs · Pony OEM number: A1828 · Sachs OEM no.: 0250 088 100
EUR 6.95
Collection only possible with online purchase and appointment.
