Choke lever for attachment to the throttle twist grip on your moped, moped or small motorcycle.
The decompression grip with hole mount is attached to older grip units (e.g. Magura) with a clamping screw and nut.
Figure 3 & 4 shows the mounted decompression lever and is for illustrative purposes only.
You can find the clamping nipple for attaching the cable that matches the decompression lever, throttle grips and other starter lever versions in the accessories section.
Nostalgic product for the highest demands from the quality brand swiing®.
Details
| Manufacturer | swiing® revival parts |
| Place of use | right |
| Color | gray |
Suitable for the following models
| Universal | |
| Puch | |
| Sachs | |
| Pony / Cilo (Beta 521 & 512) | |
| Zündapp Belmondo |
Accessories & related products
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Ø outside: 5 mm · Total length: 6 mm · Thread length: 4 mm · Number of components: 2 pcs
EUR 2.30
Magura deco / clutch lever black
Manufacturer: Magura · Material: Plastic · Material: Steel · Housing material: Steel · Material lever: Plastic · Surface: burnished · Color: black · Ø inside: 22 mm · Total length: 94 mm · Thread type: M5x0.8 (standard thread) · Mounting type: Screws · Number of fixing points: 2 pcs
EUR 58.10
Decompressor cable Ø 1.5 mm x 180 cm (pear-shaped nipple)
Ø nipple: 3.3 mm · Ø nipple: 5 mm · Nipple length: 7 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.5 mm · Cable length: 1800 mm · Nipple shape: Pears · Pony OEM number: P0919
EUR 2.80
Clamps, nipples & set screws set 73 pcs.
Manufacturer: Made in Germany · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Surface: raw · Drive: External hexagon · Drive: Knurled screw · Drive: Slot · Screw head: Hexagon · Storage method: Plastic box · Dimension storage box: 18.5 x 11.0 x 1.8 cm · Number of components: 73 pcs
EUR 69.70
swiing® revival decorative lever hole mount right black (Magura)
Manufacturer: swiing® revival parts · Material: Plastic · Material: Sheet metal (steel) · Surface: galvanized (blue) · Surface: raw · Color: black · Color: silver · Place of use: right · Total length: 50 mm · Thickness: 25 mm · Height: 45 mm
EUR 29.00
Moped fans like you also bought:
swiing® revival Bing float needle (with penetration) SRE, SRC, SRF, SRA, 85, 18
Width: 3.3 mm · Manufacturer: swiing® revival parts · Material: Aluminum · Material: Rubber · Component group Carburetor: Adjusting screws, float, etc. · Surface: blank · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Carburetor type: 18 Catalyst · Carburetor type: 85 · Color: black · Color: silver · Ø outside: 2.6 mm · Ø outside: 4 mm · Total length: 12 mm · Alternative version of the Pony OEM number: A4595A · Alternative version of the Sachs OEM number: Bing 47-032
EUR 8.05
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Ø cable: 5 mm · Ø cable: 7 mm · Spark plug socket: M4 · Cable available: No · Color: silver · Suppressed: Yes · Resistance: 1000 Ω · Component group Carburetor: Spraying · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
EUR 10.20
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Ø outside: 5 mm · Total length: 6 mm · Thread length: 4 mm · Number of components: 2 pcs
EUR 2.30
Decompressor cable Ø 1.5 mm x 180 cm (pear-shaped nipple)
Ø nipple: 3.3 mm · Ø nipple: 5 mm · Nipple length: 7 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.5 mm · Cable length: 1800 mm · Nipple shape: Pears · Pony OEM number: P0919
EUR 2.80
Hot 
swiing® ingenious 15 mm intake manifold camouflaged (Version 2.0) | Puch E50
Manufacturer: swiing® ingenious parts · Camouflaged: Yes · Material: Aluminum · Ø inside: 15 mm · Ø External connection: 20 mm · Mounting type: Screws · Hole spacing inlet: 38 mm · Number of fixing points: 2 pcs · Total height: 53 mm · Height flange center hole: 43 mm · Total length: 46 mm · Area of application: Tuning
EUR 40.60
Not in stock
Speedometer cable VDO (45 - 100 cm) black
Manufacturer: Made in Portugal · Thread type: MF10x1 (fine pitch thread) · Color: black · Outer shell length: 450 mm · Outer shell length: 500 mm · Outer shell length: 550 mm · Outer shell length: 600 mm · Outer shell length: 650 mm · Outer shell length: 700 mm · Outer shell length: 750 mm · Outer shell length: 800 mm · Outer shell length: 850 mm · Outer shell length: 900 mm · Outer shell length: 950 mm · Outer shell length: 1000 mm · 4-edge speedometer cable: 1.8 mm
EUR 10.40
Collection only possible with online purchase and appointment.
