Intake air restrictor with Ø 10 mm inner diameter suitable for all 15 mm swiing and Bing original and reproduction Bing carburettors.
An O-ring is pre-assembled, which can be used for swiing and reproduction Bing carburetors. If an original Bing carburetor is available, the corresponding O-ring must also be ordered from the accessories and replaced with the pre-assembled one.
The fuel/air mixture is adjusted to suit the requirements.
For those who regulate the mixture via the intake air, however, these practical nozzles are like Christmas and Easter at the same time.
The tedious task of "taping off" the air filter is now a thing of the past.
The eyes of the thrifty among us will also light up, as fuel consumption is also minimized and more money is left over at the end of the month.
The throttle body is simply inserted into the carburettor on the intake side. Thanks to the attached sealing ring, the throttle body is bombproof.
Exceptional product for the highest demands of the quality brand swiing®.
Details
| Manufacturer | swiing® ingenious parts |
| Material | Aluminum |
| Component group Carburetor | Adjusting screws, float, etc. |
| Surface | anodized |
| Color | black |
| Carburetor type | SRE |
| Ø outside | 15 mm |
| Ø Passage | 10 mm |
Accessories & related products
GPO 15 mm carburetor tuning | Puch
Manufacturer: GPO · Camouflaged: No · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Nozzle size: 62 · Mounting type: Plug connection clamped · Clamping screw torque (max.): 4 N/m · Total length: 66 mm · Width: 50 mm · Height: 95 mm · Area of application: Tuning
EUR 76.30
Hot 
swiing 15 mm carburetor tuning camouflaged | Puch
Manufacturer: swiing · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Nozzle size: 62 · Mounting type: Plug connection clamped · Clamping screw torque (max.): 4 N/m · Total length: 66 mm · Width: 50 mm · Height: 95 mm · Area of application: Tuning
EUR 93.90
swiing® ingenious 15 mm carburetor tuning camouflaged | Sachs 503
Nominal diameter: 15 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Area of application: Tuning · Carburetor type: SRE · Ø fuel hose connection: 6 mm · Nozzle size: 62 · Total length: 66 mm · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Width: 50 mm · Ø Air filter connection: 20 mm · Height: 95 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Camouflaged: Yes · Clamping screw torque (max.): 4 N/m
EUR 93.90
swiing® ingenious intake restrictor Ø 12 mm carburetor Bing SRE 15 mm
Manufacturer: swiing® ingenious parts · Component group Carburetor: Adjusting screws, float, etc. · Material: Aluminum · Surface: anodized · Color: black · Carburetor type: SRE · Total length: 17 mm · Ø Passage: 12 mm · Ø outside: 15 mm
EUR 9.15
Moped fans like you also bought:
GPO mushroom air filter grille, Bing SRE (Ø=20 mm)
Manufacturer: GPO · Material: Metal · Material: Rubber · Area of application: Tuning · Color: Chrome · Color: black · Filter type: Grille · Ø outside: 61 mm · Length rubber part: 63.5 mm · Length of filter section: 49 mm · Total length: 113 mm · Ø Internal connection: 20 mm · Mounting type: Bride · Mounting type: Plug connection clamped · Camouflaged: No
EUR 15.30
Light coil 6V with cable
Tension: 6 V · Performance: 17 W · Ø Internal flywheel: 90 mm · Height: 25.2 mm · Total length: 76.8 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Ø mounting hole: 4.1 mm · Hole spacing: 54 mm · Area of application: Original · Area of application: Standard
EUR 22.20
Oil filler plug with sealing ring | Puch Maxi
Material: Steel · Surface: galvanized (blue) · Thread type: M10x1.5 (standard thread) · Drive: Slot · Screw head: Lens head · Ø External head: 14 mm · Total length: 14.6 mm · Thread length: 6 mm · Number of components: 2 pcs · Puch OEM number: 364.1.10.660.1
EUR 4.10
swiing® revival M8x12 oil drain plug & copper ring | Puch E50, Z50
Manufacturer: swiing® revival parts · Material: Copper · Material: Steel · Surface: galvanized (blue) · Color: silver · Thread type: M8x1.25 (standard thread) · Thread length: 12 mm · Screw head: Hexagon · Drive: External hexagon · Drive: Slot · Width across flats Screw: 13 mm · Total length: 18 mm · Puch OEM number: 901.1053
EUR 4.10
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Number of components: 1 pcs · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard
EUR 3.30
Collection only possible with online purchase and appointment.
