Blue anodized vibration dampers for your moped, moped and small motorcycle.
The vibration dampers fit into various handlebars with an inner diameter of 17 to 21 mm.
The black plastic pin is pressed apart by tightening the Allen screw until it is optimally braced with the handlebars.
The low additional weight at the end of the handlebars reduces the occurrence of vibrations.
Total length: 66 mm
Cone length: 30 mm
Ø outside: 21.7 mm
Ø at the tip: 12.6 mm
Material: aluminium
Surface: anodized
The scope of delivery corresponds to a pair (2 pieces).
Alternative bar end plugs and various handlebars can be found in the accessories section.
Branded product from the manufacturer Power ONE Racing.
Details
| Manufacturer | Power1 |
| Material | Aluminum |
| Surface | anodized |
| Color | blue |
| Ø inside | 17 - 21 mm |
| Ø outside | 21.7 mm |
| Total length | 66 mm, 30 mm |
| Clamping diameter | 22 mm |
| Number of components | 2 pcs |
Accessories & related products
STR8 racing handlebar fork plate 7 cm / narrow aluminum blue
Manufacturer: STR8 · Material: Aluminum · Surface: anodized · Color: blue · Width: 610 mm · Fork plate holder length: 50 mm · Height: 70 mm · Ø outside: 22 mm · Clamping diameter: 22 mm · Mounting type: Fork plate · Length handlebar ends: 170 mm · Crossbar: Yes
EUR 46.90
Racing handlebar fork plate 8 cm / wide aluminum blue
Surface: anodized · Color: blue · Material: Aluminum · Fork plate holder length: 150 mm · Width: 830 mm · Height: 80 mm · Length handlebar ends: 235 mm · Clamping diameter: 22 mm · Crossbar: Yes · Ø outside: 22 mm · Mounting type: Fork plate
EUR 51.60
STR8 racing handlebar aluminum fork plate 7 cm narrow black
Manufacturer: STR8 · Material: Aluminum · Surface: anodized · Color: black · Mounting type: Fork plate · Clamping diameter: 22.1 mm · Fork plate holder length: 80 mm · Ø outside: 22.1 mm · Height: 70 mm · Length handlebar ends: 185 mm · Width: 640 mm · Crossbar: Yes
EUR 41.00
Moped fans like you also bought:
swiing nozzle set M3.5 (54 - 64) Bing SRE, SRA, SRC, SRF
Total length: 6 mm · Manufacturer: swiing · Material: Brass · Component group Carburetor: Spraying · Quantity: 6 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 54 · Nozzle size: 56 · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64
EUR 18.70
CIF Clamping screw front brake | Piaggio Ciao, SI, Bravo, Boxer
Material: Steel · Surface: galvanized (blue) · Manufacturer: CIF · Area of application: Standard · Number of components: 6 pcs · Drive: External hexagon · Thread type: M7x1 (standard thread) · Width across flats SW: 11 mm · Thread length: 19.5 mm · Screw head: Hexagon · Total length: 25 mm · Ø outside: 11 mm
EUR 4.60
Magura cable clamp Ø 7 x 9 mm
Manufacturer: Magura · Ø outside: 7 mm · Total length: 9 mm · Total length: 14.5 mm · Number of components: 1 pcs · Material: Chrome steel (known as Nirosta®) · Material: Steel · Surface: blank · Surface: galvanized (blue) · Area of application: Standard · Thread type: M4x0.7 (standard thread) · Ø Cable bushing: 2.5 mm · Drive: External hexagon · Drive: Slot · Screw head: Countersunk head · Screw head: Hexagon · Width across flats SW: 6 mm · Thread length: 6 mm
EUR 2.95
Collection only possible with online purchase and appointment.
