Washer between steerer tube nut and fork plate suitable for various vintage forks with inch thread.

Outer diameter: 31 mm
Inner diameter: 25.75 mm
Washer thickness: 1.95 mm

Was used on various old Sachs models.

Details

Thickness	1.95 mm
Ø inside	25.75 mm
Ø outside	31 mm
Nominal diameter (thread)	25 mm

Suitable for the following models

Puch
Sachs
Pony / Cilo (Beta 521 & 512)
Piaggio
Zündapp Belmondo
Solex

Moped fans like you also bought:

For: Universal · Puch · Sachs

10076

Rear light black - red

Width: 65 mm · Ø Receptacle: 3.5 mm · Depth: 55 mm · Material: Plastic · Bulb holder: BA9s · Color: black · Color: red · Mounting type: Nuts & bolts · Number of fixing points: 1 pcs · Test mark: none · Brake light: No · Battery operated: No · Reflectors: Yes

EUR 11.10

For: Puch

10077

GPO control bearing set M26x1 mm | Puch

Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Bearing type: Bearing ring · Thread type: MF26x1 (fine pitch thread) · Ø mounting frame: 31 mm · Color: silver · Ø inside: 26.8 mm · Ø outside: 41 mm

EUR 13.90

GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH

For: Puch

10096

GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH

Width: 125 mm · Manufacturer: GPO · Material: Aluminum · Area of application: Standard · Surface: sandblasted · Ø cylinder: 38 mm · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Candle thread: short · Height: 55 mm · Total length: 135 mm · Decompressor: No

EUR 38.30

swiing® revival snap ring low control bearing set (version 2.0)

For: Universal · Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Piaggio · Zündapp Belmondo · Tomos

10143

swiing® revival snap ring low control bearing set (version 2.0)

Thickness: 0.6 mm · Nominal diameter: 20 mm · Nominal diameter: 28 mm · Manufacturer: swiing® revival parts · Material: Spring steel · Surface: blank · Height: 7 mm · Puch OEM number: 349.1.30.015.1 · Sachs OEM no.: P0521

EUR 2.90

Petrol hose clamp (Ø 8.8 - 9.3 mm) Standard

Universal

10901

Petrol hose clamp (Ø 8.8 - 9.3 mm) Standard

Material: Spring steel · Outer width: 5.3 mm · Surface: galvanized (blue) · Color: silver · Mounting type: Plug connection clamped · Ø inside: 7.5 mm · Ø outside: 9.5 mm · Clamping range: 7.6 - 9.3 mm

EUR 2.10

GPO bulb 12V - 15W (P26s) with collar, 1-filament

Universal

15589

GPO bulb 12V - 15W (P26s) with collar, 1-filament

Manufacturer: GPO · Bulb holder: P26s · Tension: 12 V · Color: white · Ø base: 26 mm · Performance: 15 W · Test mark: none · Ø Lamp head: 25 mm · Total length: 43 mm · LED: No

EUR 3.40

Polini air filter | Piaggio Ciao, SI, Bravo, Boxer

For: Piaggio

18904

Polini air filter | Piaggio Ciao, SI, Bravo, Boxer

Width: 98 mm · Manufacturer: Polini · Material: Plastic · Area of application: Tuning · Filter type: Foam · Color: black · Mounting type: Plug connection clamped · Ø Internal connection: 50.6 mm · Ø outside: 53 mm · Height: 94.7 mm · Total length: 29 mm · Camouflaged: No

EUR 17.30

Dado forcella M27,5x1 aperto | Piaggio SI Europe, Boxer

For: Piaggio

23247

Fork steerer nut M27.5x1 open | Piaggio SI Europe, Boxer

Material: Steel · Surface: chrome-plated · Ø inside: 22.5 mm · Thread type: MF27.5x1 (fine pitch thread) · Drive: External hexagon · Height: 19.1 mm · Width across flats SW: 36 mm · Piaggio OEM number: 184431

EUR 10.40