Black, adjustable dampers for your moped, moped and small motorcycle.
The hardness or preload of the dampers can be adjusted in five stages thanks to the special spring mount.
Length (mount - mount): 340 mm
Outer diameter of coil spring: 46 mm
Holt diameter: 24 mm
Bush diameter for mounting: 10 / 8 mm
With the plastic bushes supplied, the diameter at the mounting points can be shortened from 10 mm to 8 mm.
The rear springs should always be secured with large washers to prevent the plastic bushes from shifting if lateral forces occur.
The scope of delivery includes one pair.
Rear springs in other colors, the matching adjustment key, washers and fastening material can be found in the accessories section.
Suspension strut from the MKX-SHOCK brand.
Details
| Manufacturer | MKX |
| Surface | varnished |
| Damping type | Spring |
| Adjustable | Yes |
| Color | black |
| Mounting type | Nuts & bolts |
| Ø spars | 24 mm |
| Number of fixing points | 2 pcs |
| Ø outside | 46 mm |
| Ø Fastening inside | 8 mm, 10 mm |
| Total length | 340 mm |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Contents [ml]: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Color: blue · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 25.50
EUR 2’550.00/l
Inox
Hot 
swiing® revival screws & axle set shock absorber | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Chrome steel (known as Nirosta®) · Material: Steel · Number of components: 17 pcs · Drive: External hexagon · Screw head: Hexagon · Thread type: M8x1.25 (standard thread)
EUR 20.80
MKX shock absorber 34 cm chrome
Manufacturer: MKX · Surface: chrome-plated · Color: Chrome · Damping type: Spring · Adjustable: Yes · Ø outside: 46 mm · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Ø spars: 24 mm · Total length: 340 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs
EUR 58.10
Moped fans like you also bought:
EBR fork reinforced black | Puch
Manufacturer: EWC · Material: Steel · Surface: chrome-plated · Thread type: MF26x1 (fine pitch thread) · Adjustable: No · Color: Chrome · Color: black · Spar end distance (center-center): 140 mm · Ø outer head tube: 26 mm · Total length: 580 mm · Ø head tube inside: 22 mm · Ø spars: 28 mm · Head tube length: 180 mm · Fork bridge - center wheel axle: 381 mm · Distance brake cam to wheel axle center-center: 40 mm · Thread length: 57 mm
EUR 153.70
Spotlight round Ø 13 cm chrome / black
Width: 134 mm · Depth: 80 mm · Material: Sheet metal (steel) · Area of application: Standard · Bulb holder: BA15d · Housing material: Metal · Surface: chrome-plated · Surface: varnished · Thread size: M6 · Lens material: Plastic · Color: Chrome · Color: black · Color: transparent · Mounting type: Screws · Number of fixing points: 2 pcs · Speedometer recording: None · Test mark: none · Ø outside: 130 mm · Switch included: No · Height: 147 mm · Battery operated: No
EUR 29.00
Fortune / Merrick 2.00-2.50 x 16/17" inner tube
Manufacturer: Fortune · Tire width [inch]: 2 - 2.5 " · Tire width [mm]: 50.8 - 63.5 · Width [inch]: 2 · Width [inch]: 2 1/4 · Width [inch]: 2 1/2 · Tire height [%]: 100 · Old designation: 20 x 2 · Old designation: 20 x 2.25 · Old designation: 20 x 2.5 · Old designation: 21 x 2 · Old designation: 21 x 2.25 · Old designation: 21 x 2.5 · Valve type: TR4 Auto valve · Wheel size [inch]: 16 - 17 " · Wheel size [inch]: 17 "
EUR 11.50
Magura adjusting screw brake short
Manufacturer: Magura · Material: Brass · Surface: nickel-plated · Thread type: MF6x0.75 (fine pitch thread) · Drive: Knurled screw · Color: silver · Ø External head: 9.15 mm · Ø shaft: 6.1 mm · Shank length: 6.9 mm · Total length: 31 mm · Total length: 40 mm · Thread length: 15 mm
EUR 3.95
Collection only possible with online purchase and appointment.
