Reinforced, CNC-milled clutch bell for racing purposes. Designed for the highest loads.
Can only be used in conjunction with the KTM SX50 clutch. Well proven in racing.
Fits E50 engines of all Puch Maxi mopeds.
Turned version: can only be used in conjunction with a cable or kick starter!
Reinforced press fit. No more welding points necessary.
21 teeth, helically toothed.
The special sliding bushes are included in the scope of delivery.
Details
| Manufacturer | MBR |
| Toothing type | helical toothed |
| Area of application | Tuning |
| Number of teeth | 21 pcs |
Suitable for the following models
| Puch | E50 |
Accessories & related products
MBR Clutch KTM SX50 | Puch E50
Manufacturer: MBR · Material: Steel · Material addition: Aluminum · Number of jaws: 3 pcs · Recording type: Cone mounting · Number of springs: 3 pcs · Area of application: High End · Area of application: MX · Area of application: Racing · Area of application: Tuning
EUR 395.70
Moped fans like you also bought:
BING 15 mm Bing original carburetor (1/15/46A)
Nominal diameter: 15 mm · Width: 50 mm · Height: 95 mm · Manufacturer: BING · Material: Aluminum · Component group Carburetor: Carburetor complete · Area of application: Standard · Area of application: Tuning · Carburetor type: SRE · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Camouflaged: No · Total length: 66 mm · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Mounting type: Plug connection clamped · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 5.3 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Nozzle block: 2.17 · Nozzle size: 82 · Clamping screw torque (max.): 4 N/m
EUR 155.70
Polini 24 mm carburetor (hand choke)
Manufacturer: Polini · Component group Carburetor: Carburetor complete · Carburetor type: Flat slide valve · Nominal diameter: 24 mm · Mounting type: Plug connection · Ø Air filter connection: 49 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Area of application: Tuning
EUR 174.50
Gilardoni italkit 47 mm cylinder kit without cylinder head | Puch
Manufacturer: Gilardoni italkit · Camouflaged: No · Material: Aluminum · Crankshaft stroke: 43 mm · Nominal diameter: 47 mm · Displacement: 75 ccm · Surface: sandblasted · Ø piston pin (B): 12 mm · Ø cylinder neck: 51 mm · Ø outlet inside: 26.5 mm · Ø Inlet inside: 18.3 mm · Number of fixing points: 4 pcs · Inlet window: 38.5 x 25.8 · Hole spacing outlet: 42 mm · Thread inlet: M6x1 (standard thread) · Area of application: Tuning · Hole pattern [mm]: 44 x 44 · Outlet type: slanted · Thread outlet: M6x1 (standard thread) · Decompressor: No · Hole spacing inlet: 35.5 mm · Hole spacing inlet: 60 mm
EUR 244.40
MBR piston 46.94 mm Gilardoni italkit | Puch
Manufacturer: MBR · Manufacturer: Wössner · Surface: molybdenum-coated · Nominal diameter: 47 mm · Ø outside piston (A): 46.94 mm · Ø piston pin (B): 12 mm · Compression height (C): 22 mm · Curvature (D): 2.65 mm · Total piston height (E): 48.15 mm · Number of piston rings (F): 1 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1 mm · Piston weight: 93 g
EUR 138.40
Collection only possible with online purchase and appointment.
