With this set you can easily convert your usual Puch Maxi E50 roll-on engine to kickstarter technology.
In addition, a kickstarter clutch cover including innards is required. You can find a blank clutch cover in the accessories section.
The set includes the following components:
- Kickstarter adapter plate
- Adapter plate plastic plate to clutch basket
- Pressure plate to clutch basket
- Drive pinion
- Crankshaft nut
To install the set, you only need to cut two threads in the engine housing. To do this, place the intermediate plate on your motor housing and screw it to the front two screw holes. Where the two rear holes are located, two holes must be drilled and then M6 threads cut.
The set can be removed again at any time and the engine restored to its original condition.
In addition, two clutch cover gaskets are required. You can find these in the accessories section.
Details
| Material | Aluminum |
Suitable for the following models
| Puch | E50 |
Accessories & related products
M10 sealing ring Fiber
Place of use: Carburetor · Material: Fiber · Place of use: Motor housing · Surface: raw · Ø outside: 13.8 mm · Ø inside: 10 mm · Area of application: Standard · Thickness: 1.6 mm · Sachs OEM no.: 0250 042 001 · Sachs OEM no.: 0650 131 000 · Puch OEM number: 27071 · Pony OEM number: A1817 · Pony OEM number: A5650
EUR 1.90
Moped fans like you also bought:
GPO flywheel 6V / 17W clockwise (Version 2.0) | Puch E50
Manufacturer: GPO · Material: Plastic · Material: Steel · Tension: 6 V · Performance: 17 W · Direction of rotation: right · Height: 36.5 mm · Thread type: MF26x1.5 (fine pitch thread) · Ø cone small inside: 11.5 mm · Ø cone large inside: 15 mm · Cone length: 18.5 mm · Cone ratio: 1:5 · Ø Internal flywheel: 91.1 mm · Weight: 900 g · Ø Flywheel outside: 116.5 mm · Thread length: 7 mm
EUR 103.30
Collection only possible with online purchase and appointment.
