Black, adjustable dampers for your moped, moped and small motorcycle.
The hardness or preload of the coil springs can be adjusted using the special spring mount.
Length (mount - mount): 280 mm
Ø outer spiral spring: 45 mm
Ø spars: 28 mm
Büchsendurchmesser zur Bef.: 10 mm
The rear springs should always be secured with large washers to prevent the plastic bushes from shifting if lateral forces occur.
The scope of delivery corresponds to one pair.
Rear springs from other manufacturers, the matching adjustment key as well as the washers and fastening material can be found under accessories.
Quality product from the Italian manufacturer IMCA.
Details
| Manufacturer | IMCA |
| Material | Steel |
| Surface | varnished |
| Damping type | Spring |
| Adjustable | Yes |
| Color | black |
| Mounting type | Nuts & bolts |
| Ø spars | 28 mm |
| Number of fixing points | 2 pcs |
| Ø outside | 45 mm |
| Ø Fastening inside | 10 mm |
| Total length | 280 mm |
Suitable for the following models
| Universal | |
| Tomos |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Contents [ml]: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Color: blue · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 25.50
EUR 2’550.00/l
Inox
Hot 
swiing® revival screws & axle set shock absorber | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Chrome steel (known as Nirosta®) · Material: Steel · Number of components: 17 pcs · Drive: External hexagon · Screw head: Hexagon · Thread type: M8x1.25 (standard thread)
EUR 20.80
Moped fans like you also bought:
Not so nice 
Main stand black (budget) | Puch Maxi S, P1 / X30 NS, NL, NG
Material: Steel · Surface: varnished · Stand base - center mount (A): 207 mm · Total width of stand base (B): 217 mm · Color: black · Wide receptacle (C): 66 mm · Ø Receptacle (D): 18 mm · Spring nipple distance - center pivot axis (E): 75 mm · Wide upright foot (F): 20 mm · Wide upright foot (F): 50 mm · Total height: 220 mm
EUR 23.20
Adhesive kit tank & frame black PVC carrier film | Puch Maxi S
Width: 123 mm · Width: 230 mm · Width: 330 mm · Place of use: Frame (+ tank) · Material: Polyvinyl chloride (PVC-U_hard) · Color: black · Color: white · Rear side texture: Adhesive · Consistency: UV-resistant · Consistency: petrol resistant · Height: 26 mm · Height: 60 mm · Height: 65 mm
EUR 11.00
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Thread type: M5x0.8 (standard thread) · Drive: Slot · Drive: Triangular head · Color: silver · Total length: 47 mm · Total length: 60 mm · Thread length: 35 mm · Thread length: 50 mm
EUR 15.00
Collection only possible with online purchase and appointment.
