39.0 mm piston with two 1 mm rectangular piston rings with internal locking (IS) for various Puch cylinders on your Puch moped / moped.
The detailed dimensions of the piston according to the technical drawing can be found in the details. You can also find out about the relevant piston rings, their positions and locking types on the legend in the pictures.
The piston kit contains piston pins, piston clips and piston rings.
You will find the corresponding assembly tool, piston pin locks and, if necessary, the corresponding cylinder in the accessories section.
Quality product from the Spanish manufacturer Barikit.
Details
Manufacturer | Barikite |
Ø outside piston (A) | 38.95 mm |
Compression height (C) | 22.5 mm |
Curvature (D) | 3.5 mm |
Total piston height (E) | 52.2 mm |
Number of piston rings (F) | 2 pcs |
Nominal diameter | 39 mm |
Piston ring mold | Rectangular ring |
Piston ring impact | Internal fuse (IS) |
Piston ring height | 1 mm |
Ø piston pin (B) | 12 mm |
Piston weight | 81 g |
Suitable for the following models
Puch | E50 ZA50 (air-cooled) ZA50 (fan-cooled) Z50 (X30 Sport) Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
Accessories & related products
GPO piston pin extractor Ø 10, 12, 14 mm
Manufacturer: GPO · Material: Steel · Surface: burnished · Diameter: 10 mm · Diameter: 12 mm · Diameter: 14 mm · Number of components: 7 pcs · Width across flats SW: 10 mm · Width across flats SW: 17 mm · Area of application: (Dis)assembly tool · Total length: 130 mm
EUR 23.40
Moped fans like you also bought:
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Ø Cable bushing: 1.6 mm · Screw head: Lens head · Ø outside: 5 mm · Drive: Slot · Thread length: 4 mm · Number of components: 2 pcs · Total length: 6 mm
EUR 2.35
GPO piston stopper M14x1.25
Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Diameter: 12 mm · Diameter: 16 mm · Thread type: MF14x1.25 (fine pitch thread) · Number of components: 1 pcs · Width across flats SW: 17 mm · Area of application: Special tool · Total length: 83 mm
EUR 11.20