ADDY clutch disk (inner plate) suitable for your manual moped / moped with Sachs 503 2AL / 2BL engine.
The clutch plate is suitable for the ADDY 4-plate racing clutch. The cork and rubber-based clutch lining is the second of three stages and corresponds to the sporty lining. Little wear on the steel plates, but medium transmission performance.
The clutch facings are manufactured in an environmentally friendly manner and are made from environmentally friendly materials.
Facing thickness: 3.5 mm
Price per piece - you need 4 pieces for the clutch.
Alternative clutch linings and other attachments can be found under accessories.
Quality product of the brand ADDY by Schöb Engineering.
Details
| Manufacturer | ADDY |
| Material | Cork, Rubber |
| Ø inside | 63.5 mm, 68.5 mm |
| Recording type | Interlocking |
| Ø outside | 94 mm |
| Number of slats | 4 pcs |
| Thickness | 3.5 mm |
| Area of application | Tuning |
Suitable for the following models
| Sachs | 503 - 2AL / 2BL |
Accessories & related products
Hot 
3-plate clutch | Sachs 503, 50/2 (502), 50/3, 50/4
Manufacturer: Made in Europe · Material: Composite materials · Material: Steel · Recording type: Interlocking · Ø inside: 29.6 mm · Ø inside: 35.3 mm · Ø outside: 110.5 mm · Number of slats: 3 pcs · Number of springs: 9 pcs · Thickness: 3.8 mm · Area of application: Tuning
EUR 491.10
ADDY clutch plate (4-plate clutch) green sintered technology (stage 3) | Sachs 503
Manufacturer: ADDY · Material: Composite materials · Recording type: Interlocking · Ø inside: 63.5 mm · Ø inside: 68.5 mm · Ø outside: 94 mm · Number of slats: 4 pcs · Thickness: 3.5 mm · Area of application: Tuning
EUR 13.40
Moped fans like you also bought:
NSK BO15 shoulder ball bearing 15/40/10 (A4502)
Bearing cage: Brass cage ball-guided · Inner ring width: 10 mm · Manufacturer: NSK · Material: Brass · Material: Steel · Surface: blank · Stock number: BO15 · Area of application: Standard · Bearing type: Shoulder bearing · Ø inside: 15 mm · Ø outside: 40 mm · Width: 10 mm · Ball bearing closed: No · Pony OEM number: A4502 · Sachs OEM no.: 0932 007 001
EUR 29.30
swiing® revival locking plate drive wheel Inox | Sachs 50/2, 50/3, 50/4, 503 2AL/2BL (A1717)
Manufacturer: swiing® revival parts · Material: Chrome steel (known as Nirosta®) · Number of lobes: 1 pcs · Thickness: 0.5 mm · Pony OEM number: A1717 · Sachs OEM no.: A1717 · Sachs OEM no.: 0246 049 000
EUR 8.10
Large gasket set with shaft seals Engine | Sachs 503
Material: Aluminum · Material: Copper · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Number of components: 14 pcs · Area of application: Standard · Ø outlet inside: 13.3 mm · Hole pattern [mm]: 60 x 40 · Hole spacing inlet: 32 mm
EUR 46.90
swiing® revival shim set | Sachs 503, 502, 50/2, 50/3
Manufacturer: swiing® revival parts · Material: Steel · Surface: blank / oiled · Ø inside: 12.5 mm · Ø inside: 15.2 mm · Nominal diameter inside: 13 mm · Ø outside: 18 mm · Ø outside: 21 mm · Thickness: 0.1 mm · Thickness: 0.15 mm · Thickness: 0.2 mm · Thickness: 0.4 mm · Thickness: 0.45 mm · Thickness: 0.5 mm · Thickness: 1 mm
EUR 19.90
swiing® revival silent blocks Alu Racing | Sachs 503 / 504 / 505 / 535
Manufacturer: swiing® revival parts · Ø outside: 21.95 mm · Nominal diameter inside: 8.5 mm · Material: Aluminum · Surface: anodized · Ø Bundle: 26 mm · Total length: 13 mm · Ø inside: 8.3 mm · Alternative version of the Pony OEM number: A4286 · Alternative version of the Sachs OEM number: 0251 121 000
EUR 28.10
Collection only possible with online purchase and appointment.
